
BMW 7_ая the E38 series from 1994 to 2002
	1. Introduction
	2. Governing bodies and operation receptions
	3. Settings and routine maintenance of the car
	4. Engine
	5. Systems of cooling of the engine, heating, ventilation and air conditioning
	6. A power supply system and production of the fulfilled gases
	7. Systems of electric equipment of the engine
		7.1. Systems of ignition, preheat and engine management
			7.1.1. Main data and security measures
			7.1.2. Search of malfunctions - the general information and preliminary checks
			7.1.3. Diagnostics of a control system by the engine
			7.1.4. Replacement of candles and ignition coils
			7.1.5. Replacement of rotors of distributors of ignition
			7.1.6. Replacement of candles of an incandescence
			7.1.7. Removal and ECM installation
			7.1.8. Replacement of sensors of a control system with the engine
		7.2. Charge and start systems
	8. Manual box of gear shifting and coupling
	9. Automatic transmission
	10. Kardanny and power shafts, reducer, differential and stupichny assemblies
	11. Brake system
	12. Suspension bracket and steering
	13. Body
	14. Onboard electric equipment
	15. Electric equipment schemes

7-1-5-zamena-rotorov-raspredelitelejj-zazhiganiya.html

7.1.5. Replacement of rotors of distributors of ignition

PERFORMANCE ORDER

Switch off ignition and remove the fan of system of cooling of the engine (see. Head of System of cooling of the engine, heating, ventilation and conditioning).
Remove the top section of the case of the air filter together with the MAF sensor from the relevant party (see. Head of the Power supply system and production of the fulfilled gases).

At work with the left distributor of ignition unclench collars of fastening of a plait of electroconducting.

Remember or mark connection places In/in wires that then not to mix them.

Turn out bolts and uncover the ignition distributor, trying not to damage radiator plates.