BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
3.1. General information
3.2. General information about settings and adjustments
3.3. Schedule of routine maintenance
3.4. Check of levels of liquids, control of leaks
3.5. Check of a condition and replacement of hoses and tubes in an impellent compartment, localization of leaks
3.6. Replacement of impellent oil and oil filter
3.7. Pro-cleaning and replacement of the fuel filter
3.8. Check of brake system and coupling
3.9. Check of a condition of system of production of the fulfilled gases
3.10. Check of a condition of components of a suspension bracket and steering
3.11. Check of a condition of protective covers of CV JOINTS of power shafts
3.12. AT transmission oil replacement
3.13. Replacement of brake liquid and pumping of brake system
3.14. Replacement of spark plugs
3.15. Replacement of the salonny filter (ventilation system)
3.16. Replacement of a filtering element of an air purifier
3.17. Replacement of cooling liquid
3.18. Check of a condition of tires and pressure of their rating
3.19. Check of a condition of the battery and care of it
3.20. Check of a condition of a belt of a drive of auxiliary units
3.21. Check of a condition of brushes of screen wipers and adjustment of nozzles of washers
3.22. Replacement of oil of the main transfer
3.23. Check of thickness of a conducted disk of coupling
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

3-17-zamena-okhlazhdayushhejj-zhidkosti.html

3.17. Replacement of cooling liquid

Replacement of OZh should be made on the cold engine.

Additional information on system of cooling is provided in the Head of System of cooling of the engine, heating, ventilation and conditioning.


 PERFORMANCE ORDER

  1. Establish a temperature regulator in the provision of a heater in the provision of the maximum temperature. Uncover a radiator.
  2. To Poddomkratta a car front also establish it on props. Remove the bottom protective casing of an impellent compartment and substitute under a radiator capacity for collecting following OZh.
  3. On M52 and M62 engines turn out an opening stopper for pumping of system of cooling and a stopper of drain openings from the left and right side of the block of cylinders.
Opening stopper for pumping of system of cooling of the M62 engine
Opening stopper for pumping of system of cooling of the M52 engine
Jams in the block of cylinders of the M62 engine
  1. Turn out a stopper of a drain opening in the bottom of a radiator and let's liquids flow down completely.
  1. Tighten the removed jams with demanded effort.
  2. Fill a broad tank with cooling liquid according to requirements of Specifications.
  3. Turn out an opening stopper for pumping of system of cooling and wait, while OZh with bubbles will cease to act. Tighten a stopper.

On diesel models pumping of system of cooling occurs automatically through the top tube to a separate broad tank.

  1. Establish a cover of a radiator and a broad tank.
  2. Modify level of OZh and check cooling system on existence of leaks (see. Section Check of levels of liquids, control of leaks).

«previous page
3.16. Replacement of a filtering element of an air purifier		 following page»
3.18. Check of a condition of tires and pressure of their rating