BMW 7_ the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
2.1. Access, protection
2.1.1. Keys, uniform lock and DU panel
2.1.2. Doors and trunk lid
2.1.3. Access to podkapotny space
2.1.4. Access to a jellied mouth of a fuel tank
2.1.5. Top hatch
2.1.6. Windows of doors
2.1.7. Anticreeping system
2.2. Elements of systems of safety
2.3. Car equipment, arrangement of devices and governing bodies
2.4. Devices of ensuring comfort
2.5. Receptions of operation and auxiliary systems
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes



2.1.6. Windows of doors

The description of management of means of the uniform lock is provided by window regulators in the Section Access, protection.

The mechanism / a drive of window regulators of forward doors has function of prevention of a jamming, i.e. at emergence of excessive resistance when closing window glass will be stopped and a little lowered. Nevertheless, do not interfere with closing of windows since it can lead to a trauma.

On some models shock-proof lateral glasses and back glass are established such glasses are not protected from scratches therefore for hoarfrost removal from their inside it is not necessary to use a scraper. Besides, it is not necessary to use abrasive detergents use water and household means for washing of windows.
/ the drive of window regulators works in positions "1" and "2" of the lock of ignition.
For management the switches located in the panel of the corresponding door or a door of the driver are used.

To operate window regulators it is possible and after ignition switching off, one of forward doors will not be open yet to open a window, press the switch, having overcome a resistance point.


  1. For opening/closing of a window of a door press on corresponding edges of the corresponding switch to feeling of resistance and hold the switch in this situation while glass will not occupy demanded situation. If to press the switch, having overcome a resistance point, and then to release it, glass will continue to move.
  2. To stop glass press the switch once again.

In the bottom of the control unit window regulators on a door of the driver located the switch of blocking of window regulators of back doors use it, for example, if on a back seat there are children.

previous page
2.1.5. Top hatch
following page
2.1.7. Anticreeping system