14-4-1-snyatie-i-ustanovka-datchikov-i-antenn-vspomogatelnykh-sistem.html

14.4.1. Removal and installation of sensors and aerials of auxiliary systems

Removal and installation of sensors and aerials of auxiliary systems

Rain sensor

PERFORMANCE ORDER

Remove an internal rear-view mirror. Compress a cover from sides, displace it a little up, pick up and uncover. At installation level a cover of rather sensitive element (black glass ceramics). Separate the socket. Extend fastening clips in the direction specified by an arrow, and remove the rain sensor. At installation do not allow damage of the optical element being under the sensor of a rain.

Sensors of system of the help at a parking

PERFORMANCE ORDER

Remove the central overlay of a rear bumper (see. Head Body). Separate the socket and remove the sensor. Installation is made upside-down.

Sensors of lateral safety cushions

PERFORMANCE ORDER

Switch off ignition Remove a forward seat and an overlay of a threshold from the relevant party (see. Head Body). Cast away a rug in the field of a forward seat. If necessary remove the channel of supply of hot air in a back part of salon. Separate the electroconducting socket. Turn out screws and remove the sensor of blow of a lateral safety cushion. At installation the arrow (1) on the sensor of blow of a lateral safety cushion should be turned towards a channel.

Aerial of remote control

PERFORMANCE ORDER

Remove shelf furnish behind a back seat (see. Head Body). Disconnect an antenna cable from the control unit. To remove a sticky tape and remove a cable. At installation watch that the ends of the removed cable lay on a regiment horizontally.