14-2-2-snyatie-i-ustanovka-far-i-ikh-komponentov.html
14.2.2. Removal and installation of headlights and their components
|
Below the description only removals is provided. Installation is made upside-down. |
Headlights
|
- Remove the turn index (see. Section Removal and installation of other devices of external lighting).
|
- Lift a clamp and separate the socket.
|
|
- Wring out clamps, displace a decorative level towards the central lattice, pick up and remove it.
|
|
- Displace latches inside and turn out bolts.
|
|
- Weaken nuts (1), turn out bolts (2) and release adjusting nuts (3)
|
- Remove a headlight movement on itself.
- After installation adjust a headlight (see. Section Lighting devices).
|
|
Rasseivatel and his protective glass
|
- Remove a headlight.
|
- Wring out clamps and remove sealing laying.
|
|
- Weaken screws and remove the holder movement on itself.
|
|
- Wring out the top and bottom clamps and remove protective glass of a rasseivatel.
|
|
- Turn out screws and remove a rasseivatel with a frame.
|
|
|
Replacement of the control unit and block of ignition of the left xenon headlight
|
- Remove a headlight.
- Release a clip and uncover lamps.
|
- At removal of the control unit compress the left and right clips and take the control unit socket.
|
|
- Remove a collar (1), separate the socket (2), turn out screws (3) and take the ignition block.
|
|
- Turn out screws and uncover together with the control unit.
|
|
|
|
|