13-2-8-snyatie-i-ustanovka-ehlementov-otdelki-bagazhnogo-otdeleniya-i-ego-kryshki.html
13.2.8. Removal and installation of elements of furnish of a luggage compartment and its coverGuards in furnish of a luggage compartment
|
|
- Open a luggage compartment and remove furnish of its floor (1).
|
|
At installation pay attention to correctness of provision of tension belts (2). |
|
- On the left side of models with system of navigation remove the computer of this system, lift latches (1) and remove a framework (2).
|
|
- On models with a CD changer open its cover (1), unblock a bayonet lock (2) and cast away a guard (3).
|
|
- On models with a CD changer disconnect the back panel of furnish (1) and lift it over a CD changer (2). Disassemble plastic screw connection (3) and separate furnish details.
|
|
At installation compress plastic screw connection. |
|
- On the right side liberate clamps and cast away a guard. Pick up and take out clamps (1) and remove a guard.
|
|
|
Furnish of wheel arches from a luggage compartment
|
- Remove the corresponding guard in a luggage compartment.
|
- On models with a cover for transportation of skis take out a clamp (1), remove the panel of furnish of a wheel arch (2) from a luggage compartment, lift the panel over a fixing eye (3) and disconnect from a cover framework for transportation of skis (4).
|
|
|
At installation at first fasten the panel to a cover framework for transportation of skis (4). |
|
- At replacement disassemble plastic screw connection (1) and separate details of furnish (2) and (3).
|
|
At installation compress plastic screw connection (1). |
|
|
Furnish of a cover of a luggage compartment
|
|
- Open a luggage compartment, pick up and take out caps (1) and turn out the bolts which were under them.
|
- Open a box for tools, disconnect the tape limiter of a course at towage and remove a box for tools movement up.
|
- On models with an automatic drive of a cover of a luggage compartment pick up and take out a cap (1), turn out a bolt and remove the handle.
|
- Through formed after handle removal an opening squeeze out the microswitch outside and separate its socket. Pick up and remove a protective framework of the microswitch.
|
- Remove a lamp of illumination of a luggage compartment. Take out a cap (1), turn out a bolt and remove the handle. Pick up and take out clamps (2) and remove a protective overlay of the lock of a trunk lid.
|
- Unclench clips on all perimeter and remove furnish of a cover of a luggage compartment.
- At installation replace the damaged clamps.
|
|
|
|