|
|
13-2-11-snyatie-i-ustanovka-remnejj-bezopasnosti.html
13.2.11. Removal and installation of seat beltsLobbies
|
- Remove a forward seat (see. Section Removal and installation of forward seats).
- Remove a guard on a forward seat and furnish of the central rack (see. Section Removal and installation of panels of furnish of racks of a body and ceiling).
|
- Separate the socket (1) natyazhitel of a seat belt and fix wires a collar (2) so that the socket was not intense.
|
- Turn out the screw (1) and remove a natyazhitel of a seat belt. Pay attention to marking of provision of a natyazhitel of a seat belt on a seat.
|
- Remove a clip (1) and a bracket (2). Turn out the screw (3) and remove the returnable mechanism of a seat belt.
|
|
At installation pay attention to marking of position of the returnable mechanism of a seat belt on the central rack. Be convinced of correctness of installation of a cable of a drive in a clip (1). |
|
- Give a nut (1) and remove taking-away ring of the mechanism of adjustment of a seat belt on height. If necessary remove the adjustment mechanism, having unhooked a drive cable.
|
- Installation is made upside-down.
|
|
The back
|
- Remove a back of back sitting (see. Section Removal and installation of a back seat).
- Remove the shelf behind a back seat (see. The section Removal and shelf installation behind a back seat and shtorka of back glass).
|
- Wring out clamps and remove a roller.
|
|
- To remove the left and right returnable mechanisms of a seat belt.
|
- Turn out a bolt (1) fastening of the right/left seat belt to the average returnable mechanism.
Fixture of the right belt to the average returnable mechanism
Fixture of the right belt to the average returnable mechanism
|
- Remove locks of the right and left seat belts. For this purpose unbend up the cut-out part of a sound-proof covering (2) and turn out a bolt (1).
|
- Installation is made upside-down.
|
|
|
|
|