BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and cowl adjustment, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of a luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Salon equipment
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-1-1-snyatie-i-ustanovka-perednego-kryla.html

13.1.1. Removal and installation of a forward wing

Removal and installation of a forward wing

 PERFORMANCE ORDER

  1. Open a cowl and remove or disconnect the following details:
    • Loker of a lobby wheel arches;
    • Forward index of turn;
    • Front bumper in collecting and its slip;
    • Floor covering;
  2. Top facing of a wing.
  3. Give fixture.
Bottom bolts of fastening of a forward wing
Screw of fastening of a forward wing
Back bolts of fastening of a forward wing (at an open door)
Top bolts of fastening of a forward wing
  1. Fix a cowl so that not to damage a windscreen and the next details of a body. Turn out bolts (1 and 2) and remove a wing.
  2. Installation is made upside-down. Expose a wing so that gaps between a wing and a door/cowl were uniform. Cover with hermetic connecting edges. Check installation of a cowl and, if necessary, adjust gaps (see. Specifications in Head the Body).

«previous page
13.1. External equipment and body elements		 following page»
13.1.2. Removal, installation and adjustment of doors