BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
12.1. General information, recommendations and security measures
12.2. Forward suspension bracket
12.3. Back suspension bracket
12.4. EDC system
12.4.1. Replacement of the control unit of EDC system
12.4.2. Hydroaccumulator replacement
12.4.3. Replacement of sensors of a road gleam of EDC
12.5. Steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

12-4-2-zamena-gidroakkumulyatora.html

12.4.2. Hydroaccumulator replacement

Fixing knot
1 — the Bolt (9 Nanometers)
2 — the Washer
3 — Raspornaya the plug
4 — the Nozzle

 PERFORMANCE ORDER

  1. Remove a loker of a wheel arch (see. Head the Body), turn out a carving stopper (1) sbrasyvaniye of pressure on the adjusting valve and collect pitted oil.
  1. Disconnect pipelines (see an illustration), turn out bolts (1) and remove the hydroaccumulator.
  2. Installation is made upside-down. After installation check GUR oil level (see. Head of Control and routine maintenance of the car).

«previous page
12.4.1. Replacement of the control unit of EDC system		 following page»
12.4.3. Replacement of sensors of a road gleam of EDC