BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
9.1. General information
9.2. Search of malfunctions
9.3. Removal and AT installation and hydrotransformer
9.4. Removal and installation of the pallet of a case
9.5. Removal and PNP sensor installation
9.6. Removal and installation of the ATF filter and hydraulic block
9.7. Removal and installation Ý/m valves, regulators and sensors
9.8. Replacement of an arm of the mechanism of switching of AT modes
9.9. Adjustment of the balance weight of switching
9.10. Adjustment of the lever of the selector
9.11. Adjustment and check of blocking of the lever of the selector
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes


9-10-regulirovka-rychaga-selektora.html

9.10. Adjustment of the lever of the selector

Below the description for AT A5S 310Z/440Z/560Z is provided.


 PERFORMANCE ORDER

  1. Establish the selector lever in the situation "P".
  1. On models to 08.1995 g вып. establish the adaptation No. 24 5 240 on the balance weight of the control unit and weaken a nut (2).
  1. On models from 08.1995 g вып., holding a clip (1), weaken a nut (2).
  1. On all models translate the control unit balance weight (3) forward (situation "P"). Press on draft (4) in the direction specified by an arrow, and again release. Tighten a nut (2).


«previous page
9.9. Adjustment of the balance weight of switching
following page»
9.11. Adjustment and check of blocking of the lever of the selector









http://b3-b4.ru/