BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and coupling installation
8.2.3. Replacement of the vyzhimny bearing and fork of switching off of coupling
8.2.4. Replacement of the main cylinder of coupling
8.2.5. Replacement of the executive cylinder
8.2.6. Removal and installation of a pedal of coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes


8-2-6-snyatie-i-ustanovka-pedali-scepleniya.html

8.2.6. Removal and installation of a pedal of coupling

 PERFORMANCE ORDER

  1. Remove the left bottom panel of facing of the dashboard (see. Head Body).
  2. Remove the sensor of provision of a pedal of coupling.
  1. Remove lock brackets, выпрессуйте a finger (1) and remove a coupling pedal.

At installation establish a returnable spring (2).

  1. Installation is made upside-down. Check plugs and, if necessary, replace them, previously having slightly greased.


«previous page
8.2.5. Replacement of the executive cylinder
following page»
9. Automatic transmission









http://b3-b4.ru/