BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
8.1. Manual box of gear shifting
8.2. Coupling
8.2.1. General information
8.2.2. Removal and coupling installation
8.2.3. Replacement of the vyzhimny bearing and fork of switching off of coupling
8.2.4. Replacement of the main cylinder of coupling
8.2.5. Replacement of the executive cylinder
8.2.6. Removal and installation of a pedal of coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

8-2-4-zamena-glavnogo-cilindra-scepleniya.html

8.2.4. Replacement of the main cylinder of coupling

 PERFORMANCE ORDER

  1. Lower or pump out brake liquid so that its level reached level of a place of connection of the feeding pipeline of a hydraulic actuator (1) coupling. Disconnect feeding pipeline from the tank.
  1. Removal the left lower part of facing of the dashboard (see. Head Body).
  1. Remove a clamp (1) and take out a pin.
  1. Turn out fastening bolts.
  1. Remove a clamp (1), disconnect from the main cylinder (2) drives of coupling the pipelines going to the executive cylinder, and remove it together with feeding pipeline (going to a tank).

Do not allow hit of brake liquid on a salon carpet.

  1. Installation is made upside-down. In summary pump over a coupling hydraulic actuator.


«previous page
8.2.3. Replacement of the vyzhimny bearing and fork of switching off of coupling
following page»
8.2.5. Replacement of the executive cylinder