BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.3. Power supply system of diesel engines
6.4. Systems of release and decrease in toxicity of the fulfilled gases
6.4.1. General information
6.4.2. Removal and installation of the supercharger of air of SAI system
6.4.3. Removal and installation lambda probes
6.4.4. Removal and installation of system of release of OG
6.4.5. Replacement of exhaust silencers
6.4.6. Removal and installation of the tank and EVAP system adsorber
6.4.7. Removal and EVAP valve installation
6.4.8. Removal and installation of a radiator of EGR system
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




buy viagra on line no prec usa 0c1943ba

6-4-5-zamena-glushitelejj.html

6.4.5. Replacement of exhaust silencers

Petrol models

 PERFORMANCE ORDER

  1. Measure length (And) the pipe end on the new additional exhaust silencer.
  1. The received value transfer on the additional exhaust silencer subject to replacement and cut off in this place an exhaust pipe with the help трубореза.

  1. On models with M60, M62 and M73 engines remove additional (behind the basic) the exhaust silencer (see. The section Removal and installation of system of release of OG) also establish on the new exhaust silencer the rezinometallichesky hinge for a suspension bracket it on a beam of the back bridge.
  2. On models with the M52 engine remove additional (behind the basic) the exhaust silencer (see. Section Removal and installation of system of release of OG).
  1. Put on the new additional exhaust silencer the connecting coupling so that the cut of a pipe of the exhaust silencer was in the middle of the coupling.
  1. Connect the exhaust silencer to final system by means of the coupling.

Diesel models

 PERFORMANCE ORDER

  1. Measure length (B) of the ends of pipes on the new intermediate exhaust silencer.
  1. The received value transfer on the intermediate exhaust silencer subject to replacement and cut off in this place exhaust pipes with the help трубореза.
  1. Cut both pipes between the catalytic converter and the intermediate exhaust silencer the detachable machine on a welded seam and smooth out a place реза. With Soshlifuyte the remains of a welded seam on the intermediate exhaust silencer, remove the remains of pipes from pipes of the catalytic converter.

If it is not possible to remove the remains of pipes from catalyst pipes, cut off for the corresponding length of a pipe of the new intermediate exhaust silencer.

  1. Openings on the new catalytic converter are closed самоклеющейся by a film, – completely remove it.
  1. Connect the new intermediate exhaust silencer to the catalytic converter by means of connecting couplings.

Nuts of collars should be turned down.

  1. Connect both additional exhaust silencers.


«previous page
6.4.4. Removal and installation of system of release of OG
following page»
6.4.6. Removal and installation of the tank and EVAP system adsorber