BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.3. Power supply system of diesel engines
6.3.1. Principles of functioning of control systems of diesel engines
6.3.2. Removal and installation of the case of an air purifier
6.3.3. Removal and turbokompressor installation
6.3.4. Removal and installation of an interkuler
6.3.5. Replacement of the sensor of pressure of pressurization
6.3.6. Removal and installation of the sensor of pressure in the fuel distributive highway
6.3.7. Removal and installation of a regulator of pressure and fuel distributor
6.3.8. Replacement of the valve of an otsechka of supply of fuel
6.3.9. Removal and installation of fuel lines and fuel distributive highway
6.3.10. Removal and installation of the valve of preliminary heating
6.3.11. Removal and TNVD installation
6.3.12. Removal and installation of nozzles
6.3.13. Replacement of a fuel tank, his jellied mouth, and also fuel pump and sensors of a stock of fuel
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

6-3-9-snyatie-i-ustanovka-toplivnykh-linijj-i-toplivnojj-raspredelitelnojj-magistrali.html

6.3.9. Removal and installation of fuel lines and fuel distributive highway

Components of the fuel distributive highway of the M57 engine

1 — the Pressure head pipeline to No. No. 1, 3 and 5 cylinders
2 — the Pressure head pipeline to No. No. 2, 4 and 6 cylinders
3 — Nozzles
4 — the Fuel distributive highway

5 — the pressure Sensor
6 — the TNVD Pipeline
7 — the Rezinometallichesky hinge
8-ТНВД

1 — Pressure head pipelines between the distributive highway and nozzles
2 — the Fuel distributive highway
3 — the Pressure head pipeline between the right fuel distributive highway and the fuel distributor
4 — a pressure Regulator
5 — the pressure Sensor
6 — the fuel Distributor

7 — the Pressure head pipeline between the left fuel distributive highway and the fuel distributor
8 — the Pressure head pipeline between TNVD and the fuel distributor
9 — a fastening Arm
10 — Nozzles
11 — ТНВД
12-The pressure head pipeline between both right fuel distributive highways

Models with the M57 engine

 PERFORMANCE ORDER

  1. Remove all pressure head pipelines, previously having closed the generator from hit of working liquids on it.
  2. Separate the socket of the sensor of pressure (see an illustration).
  1. By means of the adaptation No. 13 5 020 give cap nuts (1) on the fuel distributive highway and weaken cap nuts on TNVD. Disconnect the pressure head pipeline from the fuel distributive highway. Turn out bolts (3) and remove the fuel distributive highway (4).
  1. Installation is made upside-down. Turn on correctness of installation of the rezinometallichesky hinge (2).

Models with the M57 engine

Below removal of the left distributive highway is described; the right acts in film similarly.


 PERFORMANCE ORDER

  1. Remove pressure head pipelines between the fuel distributive highway and nozzles.
  1. Give cap nuts (1, 2 and 3) pressure head pipelines and turn out bolts (4) on an arm. Remove the fuel distributive highway (5).
  1. Installation is made upside-down. Pay attention to various length of bolts.


«previous page
6.3.8. Replacement of the valve of an otsechka of supply of fuel
following page»
6.3.10. Removal and installation of the valve of preliminary heating