BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.3. Power supply system of diesel engines
6.3.1. Principles of functioning of control systems of diesel engines
6.3.2. Removal and installation of the case of an air purifier
6.3.3. Removal and turbokompressor installation
6.3.4. Removal and installation of an interkuler
6.3.5. Replacement of the sensor of pressure of pressurization
6.3.6. Removal and installation of the sensor of pressure in the fuel distributive highway
6.3.7. Removal and installation of a regulator of pressure and fuel distributor
6.3.8. Replacement of the valve of an otsechka of supply of fuel
6.3.9. Removal and installation of fuel lines and fuel distributive highway
6.3.10. Removal and installation of the valve of preliminary heating
6.3.11. Removal and TNVD installation
6.3.12. Removal and installation of nozzles
6.3.13. Replacement of a fuel tank, his jellied mouth, and also fuel pump and sensors of a stock of fuel
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

6-3-7-snyatie-i-ustanovka-regulyatora-davleniya-i-raspredelitelya-topliva.html

6.3.7. Removal and installation of a regulator of pressure and fuel distributor

Models with the M57 engine

 PERFORMANCE ORDER

  1. Cover the generator to prevent hit of working liquids on it.
  2. Remove the inlet pipeline.
  1. Clear TNVD around a pressure regulator a cold cleaner and dry the compressed air. Separate the socket (1), turn out bolts (2) and remove a regulator of pressure (3) of the case turning it a hand.

Do not take a pressure regulator from TNVD by means of the tool.


  1. Check correctness of situation and integrity of sealing rings (1) and a white basic ring of a regulator (2) pressure. Before installation grease all sealing rings with pure diesel fuel.
  1. Press a pressure regulator, turning it a hand in the direction of an hour hand in TNVD to a prileganiye of interfaced surfaces.

Do not apply for this purpose a percussion instrument.

Models with the M67 engine

Previously remove the top covers of the engine.

Pressure regulator

 PERFORMANCE ORDER

  1. Give a nut.
  1. Unclench a collar (1) plait of electroconducting and give a nut (2).
  1. Turn out bolts (1) and uncover (2).
  1. Further removal and installation are made similar to removal and installation on the M57 engine (see paragraphs 3-5).

Fuel distributor

 PERFORMANCE ORDER

  1. Turn out a bolt (1) and take aside the vacuum pipeline (2).
  1. Separate the socket from a regulator of pressure of the distributor of fuel. Weaken collars (1) топливопроводов and disconnect them from the fuel distributor. Disconnect pressure head (2) pipelines and returnable (4) pipelines. Turn out bolts (5), raise the distributor of fuel a little and to disconnect the socket from the sensor (3) pressure.
  1. Remove the fuel distributor.


«previous page
6.3.6. Removal and installation of the sensor of pressure in the fuel distributive highway
following page»
6.3.8. Replacement of the valve of an otsechka of supply of fuel