BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.2.1. Principles of functioning of a control system of the petrol engine
6.2.2. Removal and installation of the case of an air purifier
6.2.3. Removal and branch pipe installation between a flowmeter of air and the butterfly valve case
6.2.4. Removal and installation of the case of a throttle, replacement of its laying
6.2.5. Removal and IAC valve installation
6.2.6. Removal and installation of the fuel distributive highway and injectors
6.2.7. Replacement of a regulator of pressure of fuel
6.2.8. Removal and installation of the fuel pump
6.2.9. Removal and installation of sensors of a stock of fuel
6.2.10. Removal and installation of a fuel tank
6.2.11. Removal and installation of a fuel jellied mouth
6.3. Power supply system of diesel engines
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

6-2-3-snyatie-i-ustanovka-patrubka-mezhdu-raskhodomerom-vozdukha-i.html

6.2.3. Removal and branch pipe installation between a flowmeter of air and the butterfly valve case

Models with the M60 engine

 PERFORMANCE ORDER

  1. On models with ASC T system disconnect a hose (1), weaken collars (2) and remove an air inlet sleeve.
  1. On models without ASC T system weaken collars (1 and 2) and disconnect a hose.
  1. Weaken a collar (2) and remove an air inlet sleeve.

Models with the M62 engine

 PERFORMANCE ORDER

  1. Disconnect a hose going to the valve of adjustment of turns of idling (IAC). Weaken a collar (1) and disconnect a branch pipe from the butterfly valve case.
  1. Turn out a bolt (1), separate the socket of the MAF sensor and remove the top section of an air purifier together with a flowmeter of air and a branch pipe.
  1. Disconnect an air (1) flowmeter from a branch pipe (2) and the resonator (3).
  1. Installation is made upside-down.


«previous page
6.2.2. Removal and installation of the case of an air purifier
following page»
6.2.4. Removal and installation of the case of a throttle, replacement of its laying