BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
6.1. General information and security measures
6.2. Power supply system of petrol engines
6.2.1. Principles of functioning of a control system of the petrol engine
6.2.2. Removal and installation of the case of an air purifier
6.2.3. Removal and branch pipe installation between a flowmeter of air and the butterfly valve case
6.2.4. Removal and installation of the case of a throttle, replacement of its laying
6.2.5. Removal and IAC valve installation
6.2.6. Removal and installation of the fuel distributive highway and injectors
6.2.7. Replacement of a regulator of pressure of fuel
6.2.8. Removal and installation of the fuel pump
6.2.9. Removal and installation of sensors of a stock of fuel
6.2.10. Removal and installation of a fuel tank
6.2.11. Removal and installation of a fuel jellied mouth
6.3. Power supply system of diesel engines
6.4. Systems of release and decrease in toxicity of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

6-2-2-snyatie-i-ustanovka-korpusa-vozdukhoochistitelya.html

6.2.2. Removal and installation of the case of an air purifier

 PERFORMANCE ORDER

  1. Consider codes of malfunctions and switch off ignition.

M52 engine

 PERFORMANCE ORDER

  1. Weaken a collar (1) and wring out brackets (2). Separate the socket (3).
  1. Turn out bolts (1) and disconnect the rezonatorny chamber (2) from the goffered casing.
  1. Turn out a bolt (1) and remove the air purifier case together with the goffered casing.
  1. If necessary wring out brackets (3 and 4) and to disconnect the case of the air filter from an air flowmeter.
  1. Installation is made upside-down. Insert rezinometallichesky hinges into support. Consider codes of malfunctions and if necessary eliminate them.

M60 and M62 engines

 PERFORMANCE ORDER

  1. Separate the MAF sensor socket (1). Weaken a collar (2) and disconnect a hose. On models with the M62 engine separate the IAT sensor socket.
  1. Wring out brackets (1) and remove an air flowmeter.

At installation replace laying between a flowmeter and the top part of the air filter.


  1. On models with the M60 B30 engine weaken a collar and disconnect a hose.
  1. Turn out the screw and remove assembly of the case of an air purifier.
  1. Installation is made upside-down.

M73 engine

 PERFORMANCE ORDER

  1. Wring out a clamp (2) and separate the socket (1).
  1. Wring out clamps (1) and weaken a collar (2). Separate the socket (3), weaken a collar (4) and disconnect a hose. Remove the top section of the case of an air purifier.
  1. Turn out the screw and remove the bottom section of an air purifier.
  1. Installation is made upside-down.


«previous page
6.2.1. Principles of functioning of a control system of the petrol engine
following page»
6.2.3. Removal and branch pipe installation between a flowmeter of air and the butterfly valve case