BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
5.1. System of cooling of the engine
5.1.1. General information and precautionary measures
5.1.2. Removal and installation of a casing of the fan
5.1.3. Removal and installation of a radiator of system of cooling
5.1.4. Removal and installation of a broad tank
5.1.5. Removal and installation of the additional fan assembled with a casing
5.1.6. Removal and installation of the water pump
5.1.7. Removal and installation of the coupling of a drive of the fan
5.1.8. Removal and thermostat installation
5.1.9. Removal and installation of a collector of system of cooling
5.2. Systems of heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

5-1-3-snyatie-i-ustanovka-radiatora-sistemy-okhlazhdeniya.html

5.1.3. Removal and installation of a radiator of system of cooling

Models with engines, except M57 and M67

 PERFORMANCE ORDER

  1. Lower cooling liquid (see. The section Replacement of cooling liquid of Head of Control and routine maintenance of the car).
  2. Remove a fan casing (see. Section Removal and installation of a casing of the fan).
  1. On models with To/in separate the thermoswitch socket.
  1. Remove the top hose of system of cooling.
  1. Remove a spring bracket (1) and remove a water hose (2). Turn out bolts (3) on a radiator with left and on the right side and remove both arms (4).
  1. Remove the bottom hose of system of cooling.
  1. Separate the socket of electroconducting (1), remove a spring bracket and remove a water hose (3).
  1. Release the right and left fastenings of a radiator, having pressed a screw-driver a latch.

For fastening installation strongly press it down (some clicks should be audible), then pick up a screw-driver a uvula of fastening and press the screw-driver handle down.

  1. Take a radiator of system of cooling from an impellent compartment movement up.

At installation pay attention to rezinometallichesky hinges with left and on the right side – insert them in holders.


Rezinometallichesky hinge
Holder of the hinge
  1. Installation is made upside-down, in summary fill system of cooling and pump over it (see. Head of Control and routine maintenance of the car).

Models with the M57 engine

 PERFORMANCE ORDER

  1. Close the generator to prevent hit on it impellent oil, fuel or OZh.
  2. Lower cooling liquid (see. The section Replacement of cooling liquid of Head of Control and routine maintenance of the car).
  3. Remove a fan casing (see. Section Removal and installation of a casing of the fan).
  4. Disconnect from a radiator the top and bottom hoses of system of cooling.
  5. Execute the actions described in paragraphs with 8 on 10.

Models with the M67 engine

 PERFORMANCE ORDER

  1. Remove a fan casing (see. Section Removal and installation of a casing of the fan).
  1. Turn out a stopper and lower cooling liquid.
  1. Separate the socket (1), weaken a collar (2) and disconnect a water hose. Remove a broad tank (3).
  1. Take out clamps (1) and disconnect water hoses (2).
Removal of the bottom hose
  1. Execute the actions described in paragraphs with 8 on 10.


«previous page
5.1.2. Removal and installation of a casing of the fan
following page»
5.1.4. Removal and installation of a broad tank