BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
4.1. General information and preparatory operations
4.2. Check of kompressionny pressure
4.3. Engine check by means of the vacuum gage
4.4. Petrol M60/1 and M60/2 engines
4.4.1. Removal and installation of a cover of a head of cylinders
4.4.2. Removal and installation of a head of cylinders, adjustment of phases GRM
4.4.3. Removal and installation of the top section of the pallet of a case
4.4.4. Removal and installation of the pallet of a case
4.4.5. Removal and installation of covers of a chain of GRM
4.4.6. Replacement of epiploons of a cranked shaft
4.4.7. Removal and flywheel installation
4.4.8. Removal and installation of belts of a drive of auxiliary units
4.4.9. Removal and installation of a damper of krutilny fluctuations and its nave
4.4.10. Removal and installation of the oil pump
4.4.11. Removal and installation of the inlet pipeline
4.4.12. Removal and installation of final collectors
4.4.13. Removal and engine installation
4.5. M62 engine
4.6. Diesel M57 engine
4.7. Diesel M67 engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




best tadalafil without a doctor's prescription usa 0c1943ba

4-4-8-snyatie-i-ustanovka-remnejj-privoda-vspomogatelnykh-agregatov.html

4.4.8. Removal and installation of belts of a drive of auxiliary units

If further use of a removed belt is supposed, note the direction of its movement.


 PERFORMANCE ORDER

  1. Remember the scheme of laying of a belt on pulleys.

Belt of a drive of the generator

 PERFORMANCE ORDER

  1. Remove the coupling of a drive of the fan of system of cooling together with a krylchatka (see. Head of System of cooling of the engine, heating, ventilation and conditioning).
  1. Having given bolts (1), weaken a tension of a belt and remove a belt (2).

In need of removal of a natyazhitel completely, turn out bolts 1 and 2.

  1. Check a belt condition (see. Head of Control and routine maintenance of the car) and if necessary replace it.
  2. Lay a driving belt on pulleys and rollers and make sure of correctness of its situation.

At installation of already used belt observe the former direction of its movement.


  1. Move an adjusting plate of a natyazhitel of a belt for a shestigrannik (1) till the end of a groove (2) and tighten a bolt (3).

Belt of a drive of the To/in compressor

 PERFORMANCE ORDER

  1. Remove a belt of a drive of the generator.
  1. Give nuts (2 and 3) and remove a belt.
  1. Check a belt condition (see. Head of Control and routine maintenance of the car) and if necessary replace it.
  2. Lay a driving belt on pulleys and rollers and make sure of correctness of its situation.

At installation of already used belt observe the former direction of its movement.

  1. Move an adjusting level of a natyazhitel of a belt for a shestigrannik (1) till the end of a groove and tighten consistently nuts (3) and (2).


«previous page
4.4.7. Removal and flywheel installation
following page»
4.4.9. Removal and installation of a damper of krutilny fluctuations and its nave