2.5.1. Start and engine switching off, start of motion
Start and engine switching off, start of motion
Preparation for a trip on the car
Before sitting down in the car make sure that its glasses, mirrors and light devices pure. Check a condition of wheels, glance under the car and make sure of absence of leakages of liquids.
Check according to the maintenance schedule levels of working liquids of the engine (the impellent oil, cooling and brake liquids), and also liquid level for washing of glasses (see. Head of Control and routine maintenance of the car).
Having settled down in the car, execute the following operations:
- Close and lock all doors;
- Adjust the provision of a seat (see. Section System of additional safety (SRS)) and rear-view mirrors;
- Make sure of operability of external lighting devices;
- Check operation of devices;
- At inclusion of ignition check serviceability To/l, the devices located in a combination;
- Fasten a seat belt and remind of it to available passengers;
- Release the parking brake and make sure that corresponding To/l went out.
Start and engine switching off
For a start make sure that the parking brake is completely cocked, and all auxiliary systems are switched off.
On models from AT move the lever of the selector of AT modes to the situation "P" or "N" and squeeze out a brake pedal. On models from RKPP squeeze out a coupling pedal.
Turn the ignition key in the situation "START" and release it immediately – the starter will work while the engine will not be started, then the starter will be switched off automatically. At the included starter do not press a gas pedal, except those cases when the engine is started hardly at very low or very high temperature, and also in the summer, at start-up of the heated-up engine within half an hour after its switching off. At an insufficient charge of the storage battery process of start does not begin, or can interrupt, in this case use the auxiliary storage battery.
Before a start of motion let's to the engine work much more on single turns (at least, 30 c). While the engine did not get warm, avoid its work on high turns and under big loading, especially in a frost.
After long high load of the engine it is not necessary to switch off it at once, let's to it at first some minutes work on single turns to avoid sharp difference of temperatures in various zones of the engine. For switching off of the engine turn a key in the ignition lock in situation "1" or "0".