BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Salon equipment
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of furnish and sound insulation of a forward door
13.2.3. Removal and installation of furnish and sound insulation of a back door
13.2.4. Removal and installation of panels of furnish of racks of a body and ceiling
13.2.5. Removal and installation of furnish of the dashboard
13.2.6. Removal and shelf installation behind a back seat and shtorka of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of furnish of a luggage compartment and its cover
13.2.9. Removal and installation of forward seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-2-9-snyatie-i-ustanovka-perednikh-sidenijj.html

13.2.9. Removal and installation of forward seats

 PERFORMANCE ORDER

  1. Move a forward seat as much as possible forward and up. Switch off ignition.
  1. Turn out a bolt of fastening of a seat belt.
  1. Unblock a stopper (1) movement on itself and take out movement inside. Remove a cable (2) drives of the mechanism of adjustment of a seat belt on height movement from itself.
  1. Move a forward seat as much as possible forward, slightly raise (1) central slip for fixing element, release (2) and raise uvulas of internal clips and remove (3) slip movement on itself.

At non-compliance with sequence of operations at removal the crossing point (4) can be broken and the slip is damaged.


  1. Separate the electroconducting socket.
  1. Turn out bolts and move a forward seat as much as possible back.

At installation replace bolts, or process old bolts Loctite 270 structure.

  1. On models till 1995 вып. unclench forward clips and remove a slip movement from itself.
  1. Turn out bolts and remove a forward seat.

At installation replace bolts, or process old bolts Loctite 270 structure.

  1. Installation is made upside-down. Do not allow hit of edges of a rug between directing seats and the body bottom in places of their fastening. Before a final tightening of bolts all bolts should be screwed by hand, and the seat is leveled.


«previous page
13.2.8. Removal and installation of elements of furnish of a luggage compartment and its cover
following page»
13.2.10. Removal and installation of a back seat