BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Salon equipment
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of furnish and sound insulation of a forward door
13.2.3. Removal and installation of furnish and sound insulation of a back door
13.2.4. Removal and installation of panels of furnish of racks of a body and ceiling
13.2.5. Removal and installation of furnish of the dashboard
13.2.6. Removal and shelf installation behind a back seat and shtorka of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of furnish of a luggage compartment and its cover
13.2.9. Removal and installation of forward seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-2-6-snyatie-i-ustanovka-polki-za-zadnim-sidenem-i.html

13.2.6. Removal and shelf installation behind a back seat and shtorka of back glass

 PERFORMANCE ORDER

  1. Remove furnish of back racks of a body (see. Section Removal and installation of panels of furnish of racks of a body and ceiling).
  2. On models without э / a drive of a back seat remove both backs of a back seat.
  3. On models with э / a drive of a back seat wring out clamps and remove levels in the top part of backs of back seats.
  1. Open a ware box in the top part of an average armrest, wring out a latch and remove a ware box movement up.
  1. On models with a sun-protection shtorka of back glass give fixture from a luggage compartment,
 

... separate the socket (1) and hang out a wire (2).

  1. Pick up and take out clamps and remove the shelf advance.

At replacement of the shelf rearrange ventilation lattices from the old shelf on the new.


  1. If necessary remove a sun-protection curtain of back glass. For this purpose give nuts,

... pick up and take out the left and right slips (1), unhook and remove a sun-protection curtain (2).



«previous page
13.2.5. Removal and installation of furnish of the dashboard
following page»
13.2.7. Removal and installation of overlays of thresholds of doors