BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.2. Salon equipment
13.2.1. Removal and installation of window regulators
13.2.2. Removal and installation of furnish and sound insulation of a forward door
13.2.3. Removal and installation of furnish and sound insulation of a back door
13.2.4. Removal and installation of panels of furnish of racks of a body and ceiling
13.2.5. Removal and installation of furnish of the dashboard
13.2.6. Removal and shelf installation behind a back seat and shtorka of back glass
13.2.7. Removal and installation of overlays of thresholds of doors
13.2.8. Removal and installation of elements of furnish of a luggage compartment and its cover
13.2.9. Removal and installation of forward seats
13.2.10. Removal and installation of a back seat
13.2.11. Removal and installation of seat belts
13.2.12. Removal and installation of a cover of the top hatch
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-2-5-snyatie-i-ustanovka-otdelki-paneli-priborov.html

13.2.5. Removal and installation of furnish of the dashboard

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the storage battery.
  2. Remove furnish of forward racks (see. Section Removal and installation of panels of furnish of racks of a body and ceiling).
  3. Remove a combination of devices (see. Head Onboard electric equipment).
  4. Remove a safety cushion of the forward passenger.
  1. Liberate a clamp (1) and separate the socket (2). Turn out bolts and remove holders (3 and 4) safety cushions of the forward passenger.
  1. Turn out screws.
  1. To turn out the top plastic nuts and remove a wooden level (1). In addition give a plastic nut on the left side of a level (2).

To establish extreme plastic nuts follows a nakatka to a level, and the central nuts – a shestigrannik to a level.


  1. Turn out screws (1 and 3) and uncover a ware box (2) and an angular part of furnish (4) movement on itself.
  1. Turn out bolts (1 and 2).
  1. Wring out clamps and remove a wooden level (1), having if necessary separated I will corrode темпостата. Wring out clamps, remove a wooden level (2) and separate the socket. Take out sockets of electroconducting of switches of lighting (3).

At installation replace the damaged clamps and caps.


  1. Turn out bolts (1).
 
  1. Turn out top (without a prokladochny washer) and bottom (with a prokladochny washer) bolts, remove the left ware box (1) and unhook a cable of an otpuskaniye of the parking brake.
  1. Turn out bolts under a steering column.
  1. Remove the central deflectors of HVAC system (see. Head of System of cooling of the engine, heating, ventilation and conditioning).
  1. Turn out bolts with left and on the right side and remove the dashboard movement on itself and up, shifting it towards the right forward door.
  1. Remove laying (1 and 2) a forward part of the dashboard and a heater.
  1. Installation is made upside-down. Pay attention to the next moments.
  2. Directly ahead of assembly of the dashboard to impose new laying of a forward part of the dashboard and a heater.
  1. Establish plastic directing (1) with left and on the right side and (2) on the center.


«previous page
13.2.4. Removal and installation of panels of furnish of racks of a body and ceiling
following page»
13.2.6. Removal and shelf installation behind a back seat and shtorka of back glass