BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and cowl adjustment, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of a luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Salon equipment
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-1-5-snyatie-i-ustanovka-perednego-bampera-i-ego-komponentov.html

13.1.5. Removal and installation of a front bumper and its components

Components of assembly of a front bumper

1 — the Lateral overlay of a bumper
2 — the Chromeplated lateral decorative level
3 — the Channel обдува brake system
4 — the Bottom section of a decorative front grille
5 — the Rivet with the rasporny plug
6, 7 — the Guard of fastening of registration plate

8 — the Central overlay of a bumper (model for the USA)
9 — the Cover of a towing eye
10 — the Towing eye
11 — the Overlay of a bumper
12 — the Protective fringing
13 — the Basic beam
14 — the Bolt with a cylindrical head
15 — the Shock damper
16 — the Arm
17 — the Insert


 PERFORMANCE ORDER

  1. Open a cowl.
  1. Turn out bolts from the left and right side and remove lateral aprons (1) wheel arches.
  1. Turn out bolts of fastening shock a damper.
  1. Wring out up fixing ledges and take away a bumper a little forward.
  1. On models with help system at a parking separate sockets of its sensors.
  1. Separate sockets (1) electroconducting of the left and right fog lights. On models with washers of headlights remove a clamp (2), disconnect a hose (3) and take away it up or muffle.
  1. Pull a bumper on itself and remove it.
  2. At replacement of a bumper rearrange from an old bumper on new fog lights and their arms, washers of headlights, the panel of fastening of registration plate, channels обдува brake system, the bottom decorative front grille and other decorative elements.

It is possible to replace lateral slips without bumper removal, – wring out them from clamps by means of a plastic wedge.


  1. Installation is made upside-down. The height of a bumper is regulated by a vvorachivaniye of bolts with a head under a prutkovy key.


«previous page
13.1.4. Removal, installation and adjustment of a cover of a luggage compartment, replacement of its components
following page»
13.1.6. Removal and installation of a rear bumper and its components