BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
13. Body
13.1. External equipment and body elements
13.1.1. Removal and installation of a forward wing
13.1.2. Removal, installation and adjustment of doors
13.1.3. Removal, installation and cowl adjustment, replacement of its racks
13.1.4. Removal, installation and adjustment of a cover of a luggage compartment, replacement of its components
13.1.5. Removal and installation of a front bumper and its components
13.1.6. Removal and installation of a rear bumper and its components
13.1.7. Replacement and adjustment of mobile glasses of doors
13.2. Salon equipment
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

13-1-4-snyatie-ustanovka-i-regulirovka-kryshki-bagazhnogo-otdeleniya-zamena-ee-komponentov.html

13.1.4. Removal, installation and adjustment of a cover of a luggage compartment, replacement of its components

Removal and installation of a cover of a luggage compartment

The plait of electroconducting of a cover of a luggage compartment has no socket therefore before its removal it is necessary to take an electroconducting plait from a cover.


 PERFORMANCE ORDER

  1. Lead round loops on a cover of a luggage compartment to avoid its adjustment after installation.
  1. Weaken the screw (1) at the left and on the right, turn out the screw (2) on the right and at the left and uncover a luggage compartment movement back.
  1. Installation is made upside-down.

Adjustment

Sizes of gaps are specified in Specifications of Head the Body.


 PERFORMANCE ORDER

  1. Adjustment of a cover of a luggage compartment is made similar to cowl adjustment, by means of loops, buffers and the lock.

Removal and installation of racks

 PERFORMANCE ORDER

  1. Open a cover of a luggage compartment, remove fixing washer (1) and a spring bracket (2).
  1. Remove a rack.
  2. Installation is made upside-down.

Removal and installation of a decorative overlay of a cover of a luggage compartment

 PERFORMANCE ORDER

  1. Turn out bolts of fastening of registration plate and lift a cover of a luggage compartment.
  1. Remove lamps (1) illumination of registration plate and separate the socket. Release clips (2).
  1. Remove consolidation.

At sample installation on consolidation and on a cover of a luggage compartment should coincide.


  1. Lift a decorative slip for a bottom (1) via the cylinder (2) locks and liberate from clips movement down and back.
  1. Installation is made upside-down. Replace the damaged clamps, caps and (if necessary) a neoprene tape (1).

Removal and installation of the cylinder of the lock of a luggage compartment

 PERFORMANCE ORDER

  1. Remove a trunk lid covering (see. Section Removal and installation of elements of furnish of a luggage compartment and its cover).
  1. Remove a collar of a plait of electroconducting (1) and separate sockets (2 and 3).
  1. To disconnect draft (1) cylinder of the lock, give nuts and remove the lock cylinder.

At installation make sure of correctness of position of draft.


  1. Unclench clips, remove microswitches (1 and 2).
  1. Lift the holder and remove the microswitch (3).

At replacement if colors of wires and кембриков microswitches differ, previously put on them the corresponding labels.

  1. Installation is made upside-down. The cylinder of the lock should be established on one axis with an aperture in a body. Check serviceability of functioning with an open trunk lid.

Removal and installation of the top part of the lock of a luggage compartment

 PERFORMANCE ORDER

  1. Remove a trunk lid covering (see. Section Removal and installation of elements of furnish of a luggage compartment and its cover).
  2. To remove a collar of a plait of electroconducting (1 on an illustration) and separate the average socket (between sockets 2 and 3).
  1. To disconnect draft (1) drive of the cylinder of the lock, turn out bolts and remove the top part of the lock of a cover of a luggage compartment.
  1. At replacement disconnect draft (1) drive, cut a collar (2) plaits of electroconducting and remove the microswitch (3).
  1. Installation is made upside-down. Check serviceability of functioning with an open trunk lid.


«previous page
13.1.3. Removal, installation and cowl adjustment, replacement of its racks
following page»
13.1.5. Removal and installation of a front bumper and its components