BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
12.1. General information, recommendations and security measures
12.2. Forward suspension bracket
12.3. Back suspension bracket
12.4. EDC system
12.5. Steering
12.5.1. Principle of work of GUR
12.5.2. Removal and installation of a steering wheel, block of a safety cushion and its contact ring
12.5.3. Removal and installation of casings of a steering column
12.5.4. Removal and installation of assembly of a steering column and sensor of an angle of rotation
12.5.5. Replacement of the lever of adjustment of a steering column
12.5.6. Removal and installation of the lock of ignition and blocking of a steering wheel
12.5.7. Removal and installation of the steering mechanism with GUR
12.5.8. Removal and installation of steering drafts, soshka and pendular lever
12.5.9. Removal and pump GUR installation
12.5.10. Corners of installation of wheels of the car - the general information
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba

12-5-3-snyatie-i-ustanovka-kozhukhov-rulevojj-kolonki.html

12.5.3. Removal and installation of casings of a steering column

Top casing

 PERFORMANCE ORDER

  1. Establish a steering column in the maximum bottom and put-forward situation.
  1. Turn out the screw.

At installation replace a rasporny nut.


  1. Press on the top casing from two parties in the places noted by shading, and extend it up.
  1. Deduce a casing from clamps and remove it.
  1. Installation is made upside-down. Get hooks (1) in grooves (2).
  1. The bracket (1) should be latched on a hook (2).

Bottom casing

 PERFORMANCE ORDER

  1. Turn out screws.
  1. Press on the top casing from two parties in the places noted on an illustration by shading, and remove the bottom casing, having pulled it down.
  2. If necessary liberate from casing clips a leather cover.
  3. Installation is made upside-down. The bracket (1 on an illustration) should be latched on a hook (2).


«previous page
12.5.2. Removal and installation of a steering wheel, block of a safety cushion and its contact ring
following page»
12.5.4. Removal and installation of assembly of a steering column and sensor of an angle of rotation