BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
12. Suspension bracket and steering
12.1. General information, recommendations and security measures
12.2. Forward suspension bracket
12.3. Back suspension bracket
12.4. EDC system
12.4.1. Replacement of the control unit of EDC system
12.4.2. Hydroaccumulator replacement
12.4.3. Replacement of sensors of a road gleam of EDC
12.5. Steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes




0c1943ba Смотрите http://www.financeup.net финансовая грамотность.

12-4-3-zamena-datchikov-dorozhnogo-prosveta-edc.html

12.4.3. Replacement of sensors of a road gleam of EDC

After installation of the sensor check and if necessary modify an inclination of headlights (see. Head Onboard electric equipment).

Forward sensor

 PERFORMANCE ORDER

  1. Separate the socket (1), give a nut (2) and disconnect the lever of the sensor of a road gleam. Turn out screws (3) and remove the sensor.

At installation the lever (4) should be turned outside.


  1. At replacement of the lever of the sensor open a bracket (1).
  1. Installation is made upside-down. The holder should be between two inflow (2). Be convinced of correctness of installation of a bracket (1).

Back sensor

 PERFORMANCE ORDER

  1. Separate the socket (2), give a nut (3) and disconnect the lever of the sensor of a road gleam.
  1. Turn out screws (1) and remove the sensor.
  2. Installation is made upside-down. The lever (4) should be turned outside.


«previous page
12.4.2. Hydroaccumulator replacement
following page»
12.5. Steering