BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
11.1. General information and security measures
11.2. Replacement of brake shoes
11.3. Removal and installation of brake disks
11.4. Removal and installation of supports
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism
11.6. Adjustment of the parking brake
11.7. Removal and installation of cables and pedal of a drive of the parking brake
11.8. Removal Д/В of stoplights and pedal of a working brake
11.9. Removal and GTTs installation and its tank
11.10. Removal and installation of the one-pass valve of the vacuum amplifier
11.11. Removal and installation of the vacuum amplifier
11.12. Removal and installation of wheel sensors
11.13. Removal and installation of the electronic control unit of ABS/ASC+T/DSC systems
11.14. Removal and installation hydromodulator of ABS/ASC+T/DSC systems
11.15. Removal and installation of sensors of cross-section acceleration of DSC3
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes


11-7-snyatie-i-ustanovka-trosov-i-pedali-privoda-stoyanochnogo-tormoza.html

11.7. Removal and installation of cables and pedal of a drive of the parking brake

 PERFORMANCE ORDER

Remove system of release of OG and its thermofilters (see. Head of the Power supply system and production of the fulfilled gases).

Forward cable

 PERFORMANCE ORDER

  1. Take out a forward cable from a connecting clip.
  1. Remove the left bottom section of furnish of the dashboard and the panel of furnish of the left forward rack of a body (see. Head Body). Cast away a rug.
  1. To pull out a cable from a cover.
  1. Remove a clamp (1), unhook and take a cable.
  1. Installation is made upside-down. In summary adjust the parking brake (see. Section Adjustment of the parking brake).

Right and left cables

 PERFORMANCE ORDER

  1. Unhook draft from the razzhimny mechanism of blocks of the parking brake.
  1. Take out a cable of a drive of the parking brake from a connecting clip.
  1. Disconnect brackets of fastening of a cable to a body and remove a cable.
  2. Installation is made upside-down. In summary adjust the parking brake (see. Section Adjustment of the parking brake).

Pedal

For descriptive reasons the course of works is described at the removed assembly of pedals.

Details of the locking device

1 — the Lock ring
2 — the Coupling spring

3 — the Lever of removal of blocking
4 — the Stopper


 PERFORMANCE ORDER

  1. Remove the bottom left panel of furnish (see. Head Body).
  1. Remove a clamp and to disconnect a forward cable.
  1. If necessary remove both heads of a lock pin (1) and take a pin.

At installation use a new lock pin.


  1. Remove a damper (1), a lock bracket (2) and a pedal of the parking brake.
  1. Installation is made upside-down. Check a condition of the axial plug of a pedal of the plug and if necessary replace it. Grease surfaces of sliding of the plug.


«previous page
11.6. Adjustment of the parking brake
following page»
11.8. Removal Д/В of stoplights and pedal of a working brake









http://b3-b4.ru/