BMW 7_ая the E38 series from 1994 to 2002
1. Introduction
2. Governing bodies and operation receptions
3. Settings and routine maintenance of the car
4. Engine
5. Systems of cooling of the engine, heating, ventilation and air conditioning
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting and coupling
9. Automatic transmission
10. Kardanny and power shafts, reducer, differential and stupichny assemblies
11. Brake system
11.1. General information and security measures
11.2. Replacement of brake shoes
11.3. Removal and installation of brake disks
11.4. Removal and installation of supports
11.5. Replacement of brake shoes of the parking brake and their razzhimny mechanism
11.6. Adjustment of the parking brake
11.7. Removal and installation of cables and pedal of a drive of the parking brake
11.8. Removal Д/В of stoplights and pedal of a working brake
11.9. Removal and GTTs installation and its tank
11.10. Removal and installation of the one-pass valve of the vacuum amplifier
11.11. Removal and installation of the vacuum amplifier
11.12. Removal and installation of wheel sensors
11.13. Removal and installation of the electronic control unit of ABS/ASC+T/DSC systems
11.14. Removal and installation hydromodulator of ABS/ASC+T/DSC systems
11.15. Removal and installation of sensors of cross-section acceleration of DSC3
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment
15. Electric equipment schemes


11-15-snyatie-i-ustanovka-datchikov-poperechnogo-uskoreniya-dsc3.html

11.15. Removal and installation of sensors of cross-section acceleration of DSC3

After replacement of sensors it is necessary to make their initialization what will need the diagnostic scanner.

The sensor of level of turns since 09.1998 g вып. carries out also function of the sensor of cross-section acceleration.


 PERFORMANCE ORDER

  1. Remove a seat of the driver, the left bottom panel of furnish of a rack of a door and an internal overlay of a threshold of a forward door (see. Head Body).
  1. Raise the finishing panel (1) bottom and take her aside. Separate the socket (2/1), turn out bolts (3/2) and take out the sensor of cross-section acceleration/level of turns (3).
  1. On models to 09.1998 g вып. for removal of the sensor of level of turns remove its casing.
  1. Separate the socket (1), turn out bolts (2) and take out the sensor of level of turns.
  2. Installation is made upside-down.


«previous page
11.14. Removal and installation hydromodulator of ABS/ASC+T/DSC systems
following page»
12. Suspension bracket and steering









http://b3-b4.ru/